Let’s Make: DIY Cutting Boards

0
34


DIY reducing boards for the win!

I’ve made DIY reducing boards earlier than (this one). BUT not like these! I needed to do one thing a bit extra distinctive. One thing that may stand out, sitting on the counter or as serveware when we’ve folks over. However extra importantly, one thing that also functioned as a reducing board – utilizing one of the best meals protected wooden, oiling it correctly, and so forth.

I did lots of analysis and discovered a ton alongside the best way, so I’m sharing every part I discovered on this tutorial.

My favourite of the three boards is certainly the lengthy wiggly one (scalloped), however I really like all of them. Right here’s how I made DIY reducing boards with just some provides from the hardwood retailer…

Why use a reducing board manufactured from wooden?

Wooden is most popular by cooks and the way cooks as a result of they’re sturdy, typically put on higher than plastic (to allow them to be used longer), are simple on knife blades, and straightforward to scrub. Plus, they appear cute imo. You possibly can go away them out on the counter, use them as a serving platter for fruits, cheeses, charcuterie, and so forth.

I wouldn’t suggest utilizing a wooden reducing board to chop uncooked meat, however I exploit it for reducing every part else.

What sort of wooden do you have to use for DIY reducing boards?

Usually, you’ll wish to use a closed grain wooden should you’re making reducing boards. This implies the wooden is sturdy and ready to withstand micro organism due to its small, mainly invisible pores. Open grain woods have seen pores and take in moisture and micro organism – not good for reducing boards.

And one other factor you’ll wish to contemplate is looking for meals protected wooden, which often produce edible nuts, fruits, leaves, or sap.

I used maple wooden for 2 of my reducing boards and I really like the outcomes. Maple is my favourite, personally. And in addition simple to search out at hardwood shops at a top quality. So it’s my prime decide. Different woods which might be nice for DIY reducing boards embrace: walnut, cherry, beech, and teak.

DIY Chopping Board Supplies

  • meals protected wooden of your alternative
  • jigsaw
  • pencil
  • bar clamps
  • sander or sandpaper
  • meals protected reducing board oil
  • material or rag

Find out how to Make a Chopping Board

1. Drawing a design.

Begin by drawing out your preliminary reducing board design with a pencil, so you should utilize it as a information. I didn’t comply with my drawings exactly after I began reducing. But it surely was good to see the drawing, so I had an concept of the form I needed to create.

2. Clamp the wooden.

Subsequent, clamp your piece of wooden all the way down to the desk or one other sturdy floor, so the wooden doesn’t transfer round whereas reducing.

3. Lower the board out with a jigsaw.

Then, utilizing a jigsaw, fastidiously lower out the design you drew on the board in the first step. I sometimes go gradual with the jigsaw, so I can see the place I’m reducing and it helps with precision too.

4. Sand the board.

As soon as the reducing is finished, use a sander to sand each floor of the completed board (together with the perimeters). You can even sand by hand, however it’ll take longer. A small element sander is nice for curved areas which might be onerous to get to with a bigger sander. It’s additionally good for smoothing the inside areas of any handles you create, that may in any other case be tough to get to for smoothing.

5. Oil and/or wax the board.

As soon as all of the sanding is full, wipe the board of any particles and use a material to evenly wipe the oil over the complete board – entrance, again, and sides. Let the oil sink in and repeat the method if obligatory. Many of the issues that I’ve examine oiling say to do two coats, in order that’s what I’d suggest. Then, it’s prepared to make use of.

How usually do you have to oil or wax your reducing board?

It relies upon. In case your reducing board begins to look uneven (gentle in some areas and darkish in others) or appears dry, that’s an indication that it must be oil or waxed once more.

Different indicators {that a} wooden reducing board must be oiled embrace:

  • should you discover liquid seeping into your board
  • if there are stains on the board
  • if the board begins to scent

Ought to I exploit wax or oil?

This can be a desire factor. You should use both one. Usually, oil penetrates deeper than wax. However many individuals use wax after making use of oil, for an additional layer of safety and sturdiness.

You can even simply us wax and nothing else, however you’ll must warmth the wax up so it’s simple to use. Beeswax and coconut reducing board wax would nicely.

DIY Chopping Board

I’ve made DIY reducing boards earlier than (this one). BUT not like these! I needed to do one thing a bit extra distinctive. One thing that may stand out, sitting on the counter or as serveware when we’ve folks over. However extra importantly, one thing that also functioned as a reducing board – utilizing one of the best meals protected wooden, oiling it correctly, and so forth.I did lots of analysis and discovered a ton alongside the best way, so I am sharing every part I discovered on this tutorial.

Servings: 1 reducing board

Value: $20

Drawing a design.

  • Begin by drawing out your preliminary reducing board design with a pencil, so you should utilize it as a information. I did not comply with my drawings exactly after I began reducing. But it surely was good to see the drawing, so I had an concept of the form I needed to create.

Clamp the wooden.

  • Subsequent, clamp your piece of wooden all the way down to the desk or one other sturdy floor, so the wooden does not transfer round whereas reducing.

Lower the board out with a jigsaw.

  • Then, utilizing a jigsaw, fastidiously lower out the design you drew on the board in the first step. I sometimes go gradual with the jigsaw, so I can see the place I am reducing and it helps with precision too.

Sand the board.

  • As soon as the reducing is finished, use a sander to sand each floor of the completed board (together with the perimeters). You can even sand by hand, however it’ll take longer. A small element sander is nice for curved areas which might be onerous to get to with a bigger sander. It is also good for smoothing the inside areas of any handles you create, that may in any other case be tough to get to for smoothing.

Oil and/or wax the board.

  • As soon as all of the sanding is full, wipe the board of any particles and use a material to evenly wipe the oil over the complete board – entrance, again, and sides. Let the oil sink in and repeat the method if obligatory. Many of the issues that I’ve examine oiling say to do two coats, so that is what I’d suggest. Then, it is prepared to make use of.

Thank with Google

I’m excited to proceed to be one in every of Google’s paid early testers for his or her Thank with Google pilot program, which lets you buy digital stickers to indicate help for the content material I create, should you’d like.

Thank with Google is an experimental characteristic that I’ve early entry to and get to check out right here with you. So, should you come throughout one thing of mine that you just love (a DIY undertaking, a room makeover you’re keen on, and so forth), you now have the power to indicate your help on this means. You possibly can even connect a private be aware to a paid digital sticker, which is shipped on to me.

For me, these digital stickers translate to direct income for creating extra of the content material that you just like most. So I hope you’ll give it a strive.

You will discover the Thank with Google characteristic as a button on the prime and backside of my weblog posts now. Thanks as at all times to your help.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here