How to Make a DIY Console Table (It’s Easy)

0
30


Construct your personal DIY console desk, like mine, in simply an hour or two. It’s straightforward! 

DIY console desk tutorial! I made this console desk for our bed room just lately for underneath $30 as a result of I couldn’t discover a console desk that was the right dimension for our area. Making my very own was one of the best choice. It was straightforward to do (solely took about an hour) and the price of supplies was WAY lower than what I deliberate to spend on a console desk on-line. Win-win!

Full disclosure, I truly made this a couple of months earlier than hitting the publish button on this submit as a result of I wished to verify it held up to make use of. Spoiler alert: This DIY console desk has held up very well up to now! So I put collectively a tutorial to share how one can make your personal… in any dimension you need.

The design is absolutely easy. So there’s a lot of room for personalisation (add cabinets, change the peak, and so forth). AND it’s an excellent newbie wooden undertaking too.

So, in the event you’re maintaining observe… A DIY console desk that prices lower than $30 to make, takes solely an hour to place collectively from begin to end, and will be personalized to suit any area? Yep! Click on by for the tutorial.

What are console tables used for?

Console tables are typically vast however shallow items of furnishings which are positioned in opposition to a wall (hallway is a standard space for console tables) or behind a settee. However they can be utilized anyplace.

Usually console tables can be utilized in a wide range of rooms for a lot of completely different duties. They fluctuate in dimension, however typically are between 28 and 32 inches in top and between 30 and 60 inches vast. Most console tables are comparatively shallow in depth (anyplace from 12 to 18 inches).

Tips on how to Make a DIY Console Desk

Supplies

  • wooden (use no matter wooden you want finest)*
  • (4x) wooden screws
  • some form of wooden glue
  • cordless drill

*See step 1 under for particular dimensions relating to the wooden sizing I went with.

Directions

1. Measure and lower wooden.

Begin by measuring and chopping down the items of wooden that you simply’ll must construct your console. In some instances, you possibly can truly get these items lower down for you at your property enchancment retailer. You simply should know the scale you need forward of time. Normally there are hand noticed accessible as properly, if there isn’t an worker round who may also help. SO you possibly can lower them in-store by yourself, in the event you don’t have entry to a round noticed, desk noticed, or one thing comparable at residence.

If you happen to’re making a quite simple console desk , like mine, you’ll simply want to chop (or have lower for you on the ironmongery store) three items of wooden. Two for the legs and one for the desk prime. To provide you a leaping off level for dimension, I lower my items of wooden to the next sizes:

  • 42 inch lengthy (tabletop)
  • 33 inches tall (for every of the 2 legs)

I chosen a wooden that was 11 1/4 inches vast (based mostly on the scale I wanted and the budget-friendliness of that width. And I used to be in a position to get all three items lower from one single piece of lumber. However relying on the peak and width you design in your console, together with then sort of wooden you decide, it’s possible you’ll must get two items of wooden to get all three items lower to the correct dimension.

2. Sand wooden.

As soon as the items have been lower, sand down any tough edges. You are able to do this by hand with sanding sponge or use an electrical sander (in case you have one).

3. Drill pilot holes.

Subsequent, create pilot holes the place your screws will finally go. You’ll want to do that in all three items to make issues simpler for the screws and provides them a information. I created pilot holes with an influence drill. Two holes on all sides of thee tabletop and two holes on the highest facet of every of the legs.

I did every of my screws one inch in from the skin and did two screws on all sides. You could possibly go as much as three on all sides if that feels higher for you.

4. Add screws.

After the pilot holes have been created, add your screws to connect the items. And that’s it. Tremendous easy.

Take it Additional: Extra Console Desk Concepts

The bigger you make your console desk, the extra probably you’ll want some form of extra assist to maintain your desk sturdy. The simplest method to do that is to create a shelf 4-8 inches from the highest that stretches all the best way throughout from one leg to the opposite.

Simply wished to say that right here, in case you might be curious.

Extra DIY Wooden Concepts to Attempt

If you happen to’re on the lookout for any extra wooden DIY initiatives to strive with leftover wooden, listed below are a handful of my favorites…

  • My favourite DIY desk I’ve made. Its utterly customizable to your area and nice while you want one thing that saves area, however nonetheless as storage.
  • This DIY bathroom organizer is a cool one to strive! It has a mirror, toothbrush holder, shelf, and the whole lot.
  • Make a wood peg rail, with this tremendous ample tutorial.
  • A wooden desk organizer tutorial, that has a cool, natural fashionable model.
  • And final however not least, made a DIY circle shelf that turned out fairly cool. Nice newbie undertaking and appears cute with vegetation on it.

Simple wood console table with pink mushroom lamp and large plants

Primary bedroom with simple console table and paper lantern pendant

Construct a DIY Console Desk

DIY console desk tutorial! I made this console desk for our bed room just lately for underneath $30 as a result of I could not discover a console desk that was the right dimension for our area. Making my very own was one of the best choice. It was straightforward to do (solely took about an hour) and the price of supplies was WAY lower than what I deliberate to spend on a console desk on-line. Win-win!

Key phrase: console desk, diy, furnishings, wooden furnishings

Creator: Brittni

Price: $30

  • wooden *See step 1 under for particular dimensions relating to the wooden sizing I went with.
  • 4x wooden screws
  • some form of wooden glue
  • cordless drill

Measure and lower wooden.

  • Begin by measuring and chopping down the items of wooden that you’re going to must construct your console. In some instances, you possibly can truly get these items lower down for you at your property enchancment retailer. You simply should know the scale you need forward of time. Normally there are hand noticed accessible as properly, if there is not an worker round who may also help. SO you possibly can lower them in-store by yourself, if you do not have entry to a round noticed, desk noticed, or one thing comparable at residence.

  • If you happen to’re making a quite simple console desk , like mine, you may simply want to chop (or have lower for you on the ironmongery store) three items of wooden. Two for the legs and one for the desk prime. To provide you a leaping off level for dimension, I lower my items of wooden to the next sizes:

  • 42 inch lengthy (tabletop)

  • 33 inches tall (for every of the 2 legs)

  • I chosen a wooden that was 11 1/4 inches vast (based mostly on the scale I wanted and the budget-friendliness of that width. And I used to be in a position to get all three items lower from one single piece of lumber. However relying on the peak and width you design in your console, together with then sort of wooden you decide, it’s possible you’ll must get two items of wooden to get all three items lower to the correct dimension.

Drill pilot holes.

  • Subsequent, create pilot holes the place your screws will finally go. You may want to do that in all three items to make issues simpler for the screws and provides them a information. I created pilot holes with an influence drill. Two holes on all sides of thee tabletop and two holes on the highest facet of every of the legs.

  • I did every of my screws one inch in from the skin and did two screws on all sides. You could possibly go as much as three on all sides if that feels higher for you.

Extra Console Desk Concepts
The bigger you make your console desk, the extra probably you may want some form of extra assist to maintain your desk sturdy. The simplest method to do that is to create a shelf 4-8 inches from the highest that stretches all the best way throughout from one leg to the opposite.
Simply wished to say that right here, in case you might be curious.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here