A Look At The Finished Bathroom Vanity


I’m nonetheless making progress on the lavatory, and feeling extremely motivated and enthusiastic about it. Tomorrow, I’ll share the DIY steps detailing how I completed the self-importance (if you missed Part 1 of this DIY project, you can see it here), however I’m in a little bit of a rush to get out the door this morning to get to a lunch for my brother’s birthday. However I couldn’t NOT present you ways this self-importance turned out as a result of I’m simply so enthusiastic about it!

I’m fairly certain that that is the primary piece of wooden furnishings I’ve ever constructed that wanted to look as near excellent as potential proper after the construct as a result of it’s simply going to get a transparent coat and nothing else. I’m not a cupboard builder or end carpenter, so I usually rely closely on wooden filler and caulk to make up for my lack {of professional} abilities.

That’s a superb plan when a bit of DIY furnishings goes to be painted. However when the piece goes to be left in its pure state with only a clear coat as a result of the purpose is to indicate off the beautiful wooden, there’s a complete lot much less wiggle room within the constructing course of, and there’s no counting on quite a lot of wooden filler and caulk to make up for lack of abilities.

With all of that mentioned, I’m fairly happy with how this self-importance turned out. It’s not excellent, but it surely’s the closest to perfection I’ve ever gotten.

I went forward and put the pulls on as a result of I all the time wish to drill the holes for pulls and knobs earlier than portray or clear coating a bit of furnishings. I don’t like taking the prospect that I’d mess up a model new end on a bit whereas drilling holes for pulls. However these are straightforward to take away earlier than I end the self-importance.

Right here’s a detailed up look.

I used to be just a little nervous that the walnut veneer and the strong walnut wooden wouldn’t mix collectively sufficient since these elements all got here from three completely different locations (the legs from one place, the lumber from a neighborhood place, and the veneer from a 3rd place), however I feel all of them mix collectively very properly. I hope it stays that means with the clear coat!

The drawers have full extension delicate shut drawer slides. So whereas the drawers aren’t very broad or tall, I do have a full 18 inches of depth for each.

I had initially deliberate to stain the drawer packing containers with my new favourite walnut stain (Behr water-based wooden stain), however now I’m not sure. Possibly I ought to simply depart them the colour they’re and simply clear coat them. Y’all can let me know what you assume. Would you allow them as is and simply clear coat? Or would you stain them to match?

I do have to make one small addition. I began constructing the carcass for the middle storage cupboard yesterday (extra to come back on that later as nicely), and I modified my plan for this cupboard.

My authentic plan was to have the vanities 24 inches deep, and the middle cupboard 27 inches deep, which signifies that the middle cupboard would stick out three inches previous the vanities. Ever since I got here up with this design for this wall, I’ve imagined the middle cupboard being deeper than the vanities.

However I spotted that if that cupboard is 27 inches deep, I gained’t be capable to attain the window to open and shut the window. I don’t like having home windows that I can’t attain. So I modified plans, and determined to have the vanities be three inches deeper than the storage cupboard, which nonetheless provides us loads of room for storage whereas permitting me to achieve the window.

Whereas the countertop of the self-importance will butt up towards the aspect of the storage cupboard, the desk base of the self-importance was by no means meant to the touch the aspect of the storage cupboard. So now, with this shallower depth on the storage cupboard, that signifies that at sure angles (even with the countertop masking all of this space), this aspect will present. It’s a straightforward repair. I simply needed to order a brief piece of 1″ x 6″ walnut (which ought to be right here this afternoon) in order that I can minimize a bit to suit between the legs on this aspect. The wall aspect gained’t want it.

However that’s a really minor change/addition that must be made, and it’s simply a kind of issues that occurs as a undertaking progresses and adjustments need to be made.

So let’s not finish there. Let’s finish with this magnificence. 🙂

Source link


Please enter your comment!
Please enter your name here